Bathroom Wall Cabinets Building and Design
Bathroom wall cabinets are not that hard to make by yourself. Even if this project is proper for either the experienced craftsman or the brave newbie, designing the cabinetry in the bathroom shows the personality of the homeowner. When you make your own bathroom wall cabinets, this is a major option to put a personal touch to your home. To build bathroom wall cabinets, plan your design cautiously before trying to build custom cabinets.
Bathroom Wall Cabinets Building
The first step of building bathroom wall cabinets is beginning with the end panels and the shelving. Then, you need to Pre-drill holes for the end nails and fill the holes with putty afterwards. Safe the 1/4-inch plywood backs to the cabinets with tacks instead of finish nails. The next step to build bathroom wall cabinets is put down the cabinets on their backs and lay out the hardwood for the fronts. The fronts should be built 1/2 inch wider than the cabinets. And last, Pre-drill holes for the finishing nails prior to securing the front on the cabinets. Last, run a bead of glue on the front edge of the cabinets all over the place the front makes contact to build bathroom wall cabinets.
Bathroom Wall Cabinets Design
The first step to design bathroom wall cabinets is determining the preferred length of the cabinets and records the measurement. Next, decide the height of the cabinets. Vanities stand 30 inches from the floor and 22 inches deep, including the top. Then, draw the cabinets on graph paper with a 12-inch ruler. Allow each square on the graph paper stand for one unit of measurement and use it for all drawings.
Next, to design bathroom wall cabinets, once you complete the drawings, make a list of parts. When measuring for the shelves, let 3/4 inch for every end panel of the cabinets. The shelving for the cabinets will be the length amid the end panels. Let 1/4 inch for the back of the cabinets and 3/4 inch for the fronts. Last, to design bathroom wall cabinets, you need to consider cabinets’ front. Cabinets’ fronts are normally made from solid wood while the rest of the cabinets are made from plywood. Let for 2-inch stiles (the vertical pieces) and 3-inch rails (the horizontal pieces). That is all the information about bathroom wall cabinets.