Kohler Kitchen Faucet Prices and 20 Models
Kohler kitchen faucet usually works in single handle which means that it only operates only both hot and water. This is obviously dependent on where you hold the handle. Kohler kitchen faucet is provided with sprayers whose additional line that is connected to the center of the faucet body. The operation work pretty much like this. When trigger is pressed, the diverted will stop the water and later will divert it from the sprayer. The diverted can be replaced. The faucet supply can be turned off by turning them to right. The faucet handle should be lifted to release water from the lines.
The small plug should be found in the screw in the back of faucet handle. You can try to pry the plug using your fingernails or simply by using the small flat-head screwdriver. The use of hex is to make the set crew loose. The handle should be pulled in order to expose the bonnet. Then the bonnet is twisted with the direction of counterclockwise. This is to remove the mounting nut. The mounting nut can be rotated to remove. If you are unable to remove it by your own bare hand. Pump pliers can be used to avoid you from breaking the finish. The faucet should be pulled up as you twist it back and forth.
The small O-ring is grabbed that is located in the front of the diverted by needle pliers or your own fingers. The O-ring should be removed from the faucet body. Then you should hold the needle pliers and the diverted should be pulled right from the faucet. The smaller end of diverted can be pushed. You should be sure to line up the grooves in the faucets from the diverted. You should have the diverted sided with no resistance. Then the O-ring can be inserted.