Kirsch Curtain Rod Pictures and Prices
Kirsch curtain rod usually works for various types of the window treatments and draperies. Particularly, kirsch curtain rod is well-suited to the type of drapery panels. In order to install the kirsch curtain rod, it absolutely takes skillful worker and demanding attention than to mount an easy rod. But it is true to say that the exhausting effort will be worth it. Kirsch curtain rod is generally known to be sturdy but has that long lasting feature. It will allow you to possess great choices that offer for the addition of your window treatments.
Kirsch Curtains Wooden Materials
This is the guide on how to put on the kirsch curtain rod to your window treatment. The drapery panels should be laid on the floor. After laying it on the floor, you should begin to measure the end of the drapery panels. If you happen to use a lot of drapery panels, then you should deduct five inches until the center overlap. That is actually the real measurement for the width. The height of the panels should be measured and deduct to one inch. It should be measured from the beginning one inch above the floor and it should be marked as the height of the panel. Pencil should be used to mark the height of your drapery panels. The width should be marked above the windows until the height meets the meeting point of the width.
Wooden Kirsch Curtain Poles
The center of these two spot should be measured. A hole in the spot should be drilled. The screws should be placed through the center of the bracket and hold over the holes. The screws should be tightened. Two brackets should be used. The rod should be pushed in to the brackets. Then the rod is going to be locked by turning the cam with the help of screwdriver. The small section of the rod will go with the direction of clockwise. As for the large section will go with the direction of counter clockwise. The cord pulley on the wall should be attached.